MOUNTING MANUAL
-
Mount the high pressure hose to the machines water outlet and the spray pistol to the high pressure hose.
-
Connect nozzle and nozzle extension
-
Check that the filter is clean.
-
Connect the water supply hose to the machines water inlet.
-
Check that the hose has no cracks.
-
Open for the water and check that there are no leakages.
-
Press the release to get the air out of the pump and hose and lock the release.
-
Apply the plug in the power socket and connect the current.
-
Release the release and use the high pressure cleaner.
ADJUSTMENT OF LANCE
(reg. lance)
The water jet can either be narrow (fig.1) or broad (fig.2). Open for the water and adjust the jet.
Fig 1
Fig 2
Fig 3
Fig 4
FILTER
Check the filter by the water supply regularly in order to prevent it from being blocked (fig.3).
STORAGE
TCL-110 high pressure cleaner shall always be stored frost free.
After long-term storage without operation, it is possible to form scales inside the machine making it difficult to
start again. In such conditions it is recommended to turn off and disconnect the power supply and rotate the
engine by hand several times so as to avoid excessive current draw on the engine and the power supply (fig4).
SAFETY LOCK
When you are not using the machine you should activate the safety lock
(placed above the handle) in order to avoid an accident.
Summary of Contents for TCL-110
Page 20: ...MOUNTING...
