24
FOOTING DETAIL - INGROUND FOOTERS (Hardware Kit #02-08-0205)
GROUND
Extension
Footer
In-ground
Footer
Place brick or
equivalent in the
bottom of all
footings to prevent
post from sinking
into the ground
Extension
Footer
SURFACING
Instructions:
1. Bolt Extenson Footer and Inground Footer
together using (2 )M10 x 20mm
(3/4”) BHCS Bolts and
M10 Lock Nuts.
Refer to Hole/Footer Location on
the last page of these instructions.
CONCRE
TE
CONCRE
TE
45º Ref.
(2) M10 x25mm
( 1”) BHCS
Bolts
(2) M10
Lock Nuts
IMPORTANT:
Never install play equip-
ment over hard, unresilient surfaces
such as asphalt, concrete or compacted
earth. It is the owner’s responsibility to
ensure the “minimum area required”
contains an appropriate amount of
resilient material to cushion accidental
falls.
Lower
Post
NOTE:
illustration depicts
8” (203mm) Extension Footer.
Installation of 2”(51mm)
Extension Footer is similar.
Clear area of any debris and level surface.
Equipment is designed to be installed on
a level surface.
SITE PREPARATION
