20.
Fit and glue the included pre-cut 3/32” balsa sheeting
to the nose and rear of the fuselage as shown.
21.
Fit and glue the included pre-cut 3/32” balsa cockpit
sheeting to the fuselage as shown, you will need to
sand the bottom edge of the sheeting to fit tight
against the nose sheeting.
22.
Glue together the two pieces of 3/32” balsa that make
the nose bottom sheeting. Fit and glue the sheeting to
the fuselage bottom as shown. Sand and cover the
fuselage.
23.
Fit and glue the vertical stabilizer together as shown.
