POWER
– power switch.
TO SATELLITE
LEFT – left satellite channel output.
MAINS IN
– power cable socket.
ATTENTION! The mains parameters are indicated below the power cord socket:
– for the amplifiers without PFC: ~230V AC 50/60Hz;
– for the amplifiers with PFC: ~160-250V AC 50/60Hz.
ATTENTION! The power to the amplifier is supplied from single-phase AC power
mains 230 V and ~50/60Hz with protective grounding. To connect the amplifier to a wall
outlet, first insert the power cord into the power cord socket and then plug it into the
wall outlet.
INPUT R
– Right Channel input (XLR, balanced).
INPUT L
– Left Channel input (XLR, balanced).
POWER
LED.
MASTER LEVEL
– input level control knob.
SAT PRESET
– DSP presets switch for satellites channels.
CLIP/THERMAL
– overload / thermal protection LED.
Indicating:
– overload condition, characterized by sound distortion and optoelectronic clip-
limiter active mode;
– thermal protection active condition in case of overheating of the output section.
SUB PRESET
– DSP presets switch for subwoofer channels.
SUBWOOFER LEVEL
– subwoofer level control knob.
USB
– USB port for connection to the PC (personal computer).
THROUGH L
– Left Channel line output (XLR male, parallel to Left Channel input).
THROUGH R
– Right Channel line output (XLR male, parallel to Left Channel input).
TO SATELLITE
LEFT – Right satellite channel output.
7
