INTRODUCTION
The
DX1000T
DSP
,
DX1400T
DSP
,
DX2100T
DSP
three-channel amplifiers are
designed for installation inside subwoofer which is a part of the active set – subwoofer plus
2 satellites.
One amplifier channel is used to connect the subwoofer, the other two – for satellites.
To create the necessary signal processing path, including crossovers, EQ and
dynamic processing, the
DSP
engine is used in the amplifier.
The digital power amplifier inside the
DX1000T
DSP
, DX1400T
DSP
, DX2100T
DSP
amplifiers ensures high reliability and perfect sound both at the minimum level of the input
signal and in the overload mode.
The full name of the model is on the label on the rear of the amplifier case.
ATTENTION! Unless specified otherwise, the word «amplifier» hereinafter applies to
any of the above models.
UNPACKING
The manufacturer’s quality control system provides for careful examination of each
product before it leaves the factory to ensure its flawless appearance. After unpacking,
please, check the unit for any physical damage. In case of damage, please, contact
your local dealer. Keep the shipping carton and all packing material, as you may
require them for reshipment of the unit.
ACCESSORIES:
1. Power cord
2. Software CD
3. Owner’s Manual
4. Warranty
