Park Audio II GS Series, Owner'S Manual

Page: 5 / 24

3
GENERAL
The GS 4 , GS 5 , GS 6 , GS 7 power amplifiers ( GS - Series) are designed for sound
signal high-fidelity amplification within professional sound reproduction systems.
The amplifier’s schematics provides for high sound quality whether under low signal
conditions or overload.
Besides the sound amplification circuitry, the amplifier contains the monitoring and
control systems which ensure its faultless functioning both in the regular mode of operation
and in case of emergency. To ensure faultless operation of
GS -Series amplifiers, please,
take time to read this Manual before use.
WARNING!
Make sure to take all precautions where required.
Please, follow all instructions and guidelines.
To avoid any risk of electrical shock and/or fire hazard, please, do not expose this
unit to rain or moisture. Do not use this unit near open water.
Use dry cloth to clean the unit.
Do not block fan vents.
Do not place the unit near heating radiators, furnaces or other heat-emitting devices.
Do not connect this unit to an ungrounded power supply line.
Protect the power cord against damage.
Disconnect the unit from power supply in case of thunder or during downtime.
In case of malfunctioning, caused by water or any other foreign matter inside or when
the unit has been dropped, or the power cord has been damaged, or the unit has been found
faulty, please, consult qualified personnel.
ATTENTION!
The GS 4, GS 5, GS 6, GS 7 amplifiers have the same design and functional features
and differ only in the schematics elements, output power and weight. Unless specified
otherwise, the word “amplifier” hereinafter applies to any of the above models.
UNPACKING
The manufacturer’s quality control system provides for careful examination of each
product before it leaves the factory to ensure its flawless appearance. After unpacking,
please, check the unit for any physical damage. In case of damage, please, contact
your local dealer. Keep the shipping carton and all packing material, as you may require
them for reshipment of the unit.