background image

 This manual describes the easiest 

1. Perform the procedures shown above in 

Table, refer to the  

Service 

and most common maintenance  

procedures. 

arefully read the instruction in the Safety precaution section. 

charger cable disconnected. C

WARNING!  

(After Using the Machine section).   

DO NOT USE MACHINE FOR A LONG TIME

than 30 days, please procee

warranty. 

machine prior to storage. Any damage caused by fr

 with the brush/pad holder and the squeegee.   

tenance section). 

1. Remove the brush/pad holder. 

2. Empty the tanks as shown in the previous paragraph. 

5

   

CAUTION

   

Do not use the machine with discharged batteries to avoid damaging the batteries and reducing the battery 

life.  

AFTER USING THE MACHINE 

After scrubbing, please proceed with below actions before leaving the machine: 

3. Perform the daily maintenance procedures (see the main

4. Store the machine in a clean and dry place,

5. If storing in an area which may reach freezing temperatures, be sure to drain all fluids from the 

eezing temperatures will not be covered by the 

 

If the machine is not going to be used for more 

d with below actions: 

2. Disconnect the battery connector.

 

   

MAINTENANCE 

The lifespan of the machine and its maximum operating safety are ensured by correct and regular 

maintenance. The following chart provides the scheduled maintenance. The intervals shown may 

vary according to particular working conditions, which will be defined by the person in charge of the 

maintenance.  

 

Maintenance procedures must be performed with the machine switched off and the batteries/battery 

All scheduled or extraordinary maintenance procedures must be performed by qualified personnel, or 

by an authorized Service Center. 

For other maintenance procedures shown in the Scheduled Maintenance 

Manual that can be consulted at any Service Center.   

SCHEDULED MAINTENANCE TABLE 

 

 

 

Inlet filter cl

Procedure

After each use

Weekly

Every six 

months

Annually

Battery charging

Squeegee cleaning

Brush cleaning

Clean tank, vacuum screen & check top cover 

gasket

Squeegee blade check and replacement

eaning

Summary of Contents for PANTHER 15B

































Reviews: