!!! This machine must be grounded! Grounding
provides the path of least resistance for
electrical current. To reduce the risk of electrical
shock should the machine malfunction, the
machine has a special grounding plug. Do not
remove the ground pin under any circumstances!
This machine is intended for commercial use. It
is constructed for use in an indoor environment
and is not intended for any other use. Use only
recommended accessories.
All operators shall read, understand and
exercise the following safety precautions:
1) Do not operate machine:
- Unless trained and authorized.
- Unless you have read and understand
operators manual.
- In flammable or explosive areas.
- With damaged cord or plug.
- If not in proper operating condition.
- In outdoor areas.
- In standing water.
- With the use of extension cords.
2) Before operating machine:
- Make sure all safety devices are in place
and operate properly.
3) When using machine:
- Only use approved burnishing pads.
- Do not run machine over cord.
- Do not pull machine by cord or plug.
- Do not pull cord around sharp edges or
corners.
- Ensure the dust collection bag is in place
and is tightly sealed to the machine.
- Turn power switch to “off “ prior to
unplugging machine.
- Do not unplug by pulling on the cord.
- Do not stretch cord.
- Do not handle plug with wet hands.
- Keep cord away from heated surfaces.
- Do not pick up burning or smoking
debris such as cigarettes, matches or
hot ashes.
- Report machine damage or faulty
operation immediately.
4) Before leaving or servicing machine:
- Turn off machine.
- Unplug cord from outlet.
5) When servicing machine:
- Unplug cord from outlet.
- Use manufacturer supplied or approved
replacement parts.
To avoid electrical shock, please
replace the power cord
immediately if any damage is being
detected. The replacement must be
performed only by an authorized person.
-3-
SAFETY PRECAUTIONS
