9
CONTRACTOR’S SPECIAL™ 2001CS
2001CS ATTACH HOSES
Firmly attach hose and quick disconnect. Make sure quick discon-
nects snap together firmly. Once attached to unit connect Q.D. to
upholstery tool. Always inspect hoses for cracks or fraying.
2001CS VACUUM, PUMP & HEATER
To use vacuum, turn on vacuum. To use pump, turn on pump.
For heater, turn on heater.
VACUUM PUMP
HEA
TER
2001CS FILL SOLUTION TANK
Lift lid to fill. For best results, fill with warm water (140o F).
ATTACH VAC & SOLUTION HOSE TO WAND
Attach hose cuff to end of wand tube. Attach female QD to male
QD located near the wand trigger.