- 32 -
3.2 Filling with medication
• Close the cap of the nebuliser. Make sure that the cap snaps
into place.
If you are to inhale several medications one after the other in one
application, rinse out the nebuliser with tap water between inha-
lations. Remove excess water by shaking the nebuliser and then
fill with medication as described.
NOTICE
Take care to ensure that the cap only moves in the direction
allowed by the hinge. Otherwise the
nebuliser cap might snap
off.
• Release the closure on the neb-
uliser upper section by pressing
your thumb against the underside
of the cap.
• Insert the nebuliser in the holder on
the compressor intended for this
purpose.
• Pour the quantity of medication
prescribed by your doctor into the
nebuliser chamber.
Ensure that the medication is filled
no higher than the upper scale
marking (max. level 8 ml). Overfill-
ing can greatly impair the nebulisa-
tion of medication.
