17
Questions about Lamira? Contact the Arikares Support Program at 1-833-ARIKARE (1-833-274-5273)
Fault and Condition
Possible Cause and Solution
1 Steady
Controller running on AC Power.
2 Steady
Controller running on battery power.
3 Flashing
Empty battery, replace batteries or switch to A/C power.
4 Flashing
The LED changed from green to red and the battery
symbol is blinking during treatment
Low battery, replace batteries or switch to A/C power.
5
Flashing
Lamira turns on but LED flashes green-red and LCD
display flashes this symbol
Bad or missing Connection Cord. Check Connection Cord between
Handset and Controller. Bad or missing Aerosol Head. Correct then
restart Controller.
6 Flashing
Lamira beeps 1x, then beeps high-low with the LED
flashing and the LCD display flashing this symbol
No ARIKAYCE detected. Add ARIKAYCE. If you have already added
ARIKAYCE, gently tap the Handset, hold the Handset level and restart
the Controller.
7 Flashing
Lamira beeps low-high 3 times, the LED flashed green-
red, the LCD displays this symbol, and then turns off
Have reached 20 minute maximum time and will shut down. If
ARIKAYCE remains, restart the Controller. After treatment is
complete, clean and disinfect the Handset including the Aerosol Head.
8 Steady
Lamira beeps 1 time and LCD shows this symbol
Misting and working properly.
9 Steady
Controller has paused. To resume press On/Off button.
10 Flashing
Press button to start treatment.
11 Brief
Functioning properly, the Controller has started properly.
Troubleshooting
K
Reference ID: 4327567
Summary of Contents for Lamira
Page 1: ...Reference ID 4327567...
