3.2 Preparation
Check the compressor housing, the power cord and the power
plug for damage every time before using. Make sure that the
local supply voltage complies with the voltage data marked on
the compressor identification label. Only use the compressor if
all components are intact. The compressor must not be oper
ated if the device or the power cord is damaged, or if damage
is suspected (e.g., after it has fallen or if there is a smell of
burning plastic).
Prepare the device for an inhalation session as follows:
• Assemble the nebuliser as described in the instructions for
use of the nebuliser.
• Attach one end of the connection tubing to the nebuliser.
• Attach the other end of the con
nection tubing to the compressor.
The tube connectors can be inser
ted more easily if they are twisted
slightly when inserting.
• Insert the nebuliser in the holder on the compressor inten
ded for this purpose.
• Fill the nebuliser as described in the instructions for use of
the nebuliser.
– 36 –