15
Cleaning
• Wipe the outer surface of your PARI
BOY N compressor with a moist cloth.
Should despite all precautions moisture find its way into the compressor, please
contact an authorised dealer or the PARI Service Centre (Tel.: +49 8151-279279
or [email protected]). Do not reuse your PARI BOY N compressor unless advised by
an authorised dealer or PARI GmbH Technical Service that it is safe to do so, or
after an inspection and any necessary repairs have been carried out by the
above.
Depending on environmental conditions, condensation may collect in the neb-
uliser connecting tube during inhalation. The moisture must be removed to
guarantee optimum treatment. Please proceed as follows:
• Disconnect the tube from the nebuliser.
• Clean the nebuliser in compliance with the appropriate instructions for use.
• Leave the tube inserted in the compressor.
• Run the compressor until all moisture has been removed.
Before cleaning always switch off the compressor and pull the power
cord from the wall outlet.
Never spray cleaning liquids into the air vents! Moisture is likely to
damage the electrical or other compressor parts and cause malfunc-
tions.
PBoy.book Seite 15 Mittwoch, 25. September 2002 9:53 09
