SafeAir™ M-600 Installation Guide
20
www.parazero.com
SafeAir M-600 V2 model
1
Connect the M-600 batteries
to the drone.
2
Before turning on the RC,
Make sure:
I)
The Arm\Disarm switch is
in
Safe
position (down
position)
II)
The Trigger swivel knob is
in full right state (safe
position)
III)
The RC batteries are fully
charged
3
Turn On the RC.
4
Remove the Safety Pin.
5
Turn on the drone’s power
and stand back to a 5-meter
safety distance from the
drone. Wait 5 seconds
.
The first time you turn on the power to the DJI
M-600, for the first time after installing the
TerminateAir, the following may occur:
I)
If the power goes on only in one battery,
turning another battery on should solve the
problem
II)
The DJI M-600 system LED may show a RED
light. In this case, you should unlock using
the DJI assistant application
6
A
BLUE
LED light will appear on
the SmartAir and a short beep
sound will be heard.
