paratech P43 Series, Manual

Page: 15 / 44

11
4 Flying
4.1 Risers with Speed System
Risers without Speed System
4.1.1 The Speed System of the P43
The footrest lines are moved with the on the risers with Brummel hooks attached
speedlines. The footrest lines are guided by the on the harness attached pulleys.
Adjust the length of the footrest on each side of the foot pedal so that with stretched
legs the speed system is fully engaged which means, both pulleys touch each other.
As you release the foot pedal it should not cause the risers to shorten and the foot
pedal should not touch the seat board. Please adjust your speed system on the
ground. Sit in your harness and have a helper holding your risers up.
Most of the flying is done without using the speed system. To fly with speed for best
glide in quiet air do not use the speed system. It is being used to fly faster then the
best glide ratio in windy conditions. The speed system is especially helpful to improve
the glide angle when flying against the wind or up wind.
Also for a quick decent after big ears use the speed system. (page 17)