background image

24 

 

Assistance or Warranty Repair 

 

Repair or Service 

Call your Parasound dealer first. If the dealer can’t help you with your problem we encourage 
you to call Parasound’s Technical Service Department at 

415-397-7100

, Monday to Friday, 

8am

 

-

 

4pm Pacific Time. We can suggest other diagnostic tests you can easily perform.  

If we determine that your HINT 6 should be returned to Parasound or an Authorized 
Parasound Warranty Center for inspection and possible servicing, we will provide the location 
of a warranty center near you or shipping instructions for the unit’s return to Parasound. 

 

Before You Return Any Unit to Parasound for Service 

Before you send your unit to Parasound, you will need to obtain a specific Return 
Authorization (RA) number and shipping instructions from Parasound’s Technical Department. 
The RA number must be clearly marked on the outer carton. Use the original factory packing 
materials and arrange adequate insurance to cover its value. You must include a copy of your 
purchase receipt, since this document establishes the validity of this unit’s warranty. Warranty 
repairs are only performed by Parasound or Parasound Authorized warranty centers when 
your purchase receipt is from a Parasound Authorized Dealer or Parasound Authorized 
Reseller. 
 

Shipments Will Be Refused by Parasound Under the Following Conditions: 

1. Unit was sent without the Parasound-assigned RA number marked on the carton. 
2. Unit was sent in an unsuitable shipping carton and packing inserts and is likely to have 
been damaged in transit. 
3. Unit has inadequate packing materials and is likely to have been damaged in transit.  
Wrapping the HINT 6 with bubble wrap will not protect it during shipment. 
4. Unit was shipped collect for shipping charges. We do not accept collect shipments. 
5. Unit was shipped via the US Postal Service. 
6. Unit was sent to an address other than the address instructed by our Technical Department. 
 

Warranty Repair 

Please read your accompanying Parasound Limited Warranty carefully to understand the 
applicable rights and limitations. This section provides instructions for obtaining repairs, both for 
units covered under the Parasound Limited Warranty and for units or situations which are 
outside the Warranty.  The complete warranty can be found at www.parasound.com. 
 

Unit is not eligible for repair under the terms of the Parasound warranty if: 

1. Unit was not purchased from a Parasound Authorized Dealer. 
2. You do not have the original bill of sale or sales receipt from a Parasound Authorized Dealer. 
3. You are not the original owner. The Parasound warranty is not transferable. 
4. Unit’s serial number was removed, modified, or defaced. 
5. Unit shows evidence of abuse and/or misuse. 
6. Unit was modified in any way. 

7. A prior repair was attempted by an unauthorized repair station. 

Summary of Contents for HINT 6



























Reviews: