Parasound
®
200 Pre Owner’s Manual
Page 15
Renaming Inputs
The factory default input names are “Input 1”, “Input 2”, “Input 3/Aux”, USB, Optical, Coax and Bypass. To
make it easier to remember which source is connected to what input number you may wish to rename the
inputs. Any of the inputs can be renamed to be one of the names in the following list.
BLUESOUND
BLUETOOTH
BLU-RAY
CD PLAYER
CABLE
DVD
DAC
DISC
GAME
INTERNET
LAPTOP
MAC
MP3 PLAYER
NETWORK
PC
PHONO
PHONE
SACD
SAT
SERVER
SONOS
TUNER
TV
TABLET
TAPE
VIDEO
VINYL
WIRELESS
Renaming Procedure:
1) Select the input you wish to change.
2) Press the “Set” button.
3) Press the “Input Name ◄ and ►” buttons to cycle through the available names.
4) When you have found the name you want press “Set” again to memorize.
Repeat steps 1 through 4 for the other inputs.
Input Level Offset
This feature allows you to increase or decrease each input’s volume level individually to compensate for
varying output levels among different sources. If you notice a sound level change when switching from one
input to another, you can raise or lower the corresponding input level offset over a range of +/-8 dB. After each
input level offset is adjusted, your sources should all play at about the same volume level.
Offset Setting Procedure:
1) Select the input you wish to adjust.
2) Press the “Set” button.
3) Press the volume up or volume down buttons. [the display will show current setting]
4) After selecting the desired offset press “Set” again to memorize.
Repeat steps 1 through 4 for the other inputs as needed.