Parasit Studio
Offboard Wiring
•
9V pad to DC jack positive lug (or battery clip +)
•
GND pad to DC jack negative (or battery clip -)
•
OUT pad to output jack Tip
•
GND pad to output jack sleeve
•
LFO sw pads to momentary SPST switch or button
(which wire goes
to which switch lug doesn't matter)
Optional sequencer on/off indicator LED
•
If you want an LED to indicate when the LFO is running (like I have
in my complete build, combined inside the LFO button) this is how
you hook it up.
•
Connect the square ”LFO SW” pad to a current limiting resistor
•
LED cathode/negative side to the resistor
•
LED anode/positive side to DC jack (or battery clip) po
Summary of Contents for QUANTOM DEFRAKULATOR
Page 6: ...Parasit Studio Schematic...