ASSEMBLY AND INSTRUCTIONS
7
Hardware Used:
12 x CC, Bolt M4x10
3
4
3. Attach the Post Support Plate (F)/Lower Post (E) to the Tank
Housing Assembly (G/H).
(NOTE: Make sure Paramount logo
is facing forward directly over the Tank Housing Support
Bar.)
Align the holes in the Post Support Plate (F) With the holes
in the top of the Tank Housing Assembly (G/H) and insert a total
of 12 M4x10 (CC)bolts into the holes and loosely tighten.
Once all bolts have been inserted, tighten with a wrench.
Make sure you start from the back of tank housing.
4. Attach Tank Housing Door (I) to the Tank Housing Assembly
(G) by sliding the pins on the side of the door into the hinges
located on the right side of the Tank Housing Assembly (G).
(
NOTE:
Make sure you hold door to the SIDE of the Tank Housing
Assembly before trying to align pins. If you hold door to the
FRONT of the Tank Housing Assembly, you will NOT be able to
align pins correctly.)
