Paramount Fitness L10-SS-P Owner'S Manual Download Page 4

GENERAL DESCRIPTION - 4

CONSTRUCTION CHARACTERISTICS

Color:  Brushed matte finish on stainless steel models. (Powder coat finish on steel models)

Casings:  Base material on Deluxe Models feature stainless steel. (Galvanized sheet metal on steel models)

The burner is controlled using a positive lock, on/off gas control valve. The gas supply is controlled from gas  

cylinder  valve.  The  burner  &  burner  assembly  components  are  constructed  from  stainless  steel.  Emission  of  

infrared heat is assisted by the aluminum reflector hood.

SAFETY  Feature  : This  appliance  has  built  in ‘’gas  cut  off’’  switch  that  shuts  off  the  gas  supply  to  the  heater  

assembly head any time the Burner Unit is tilted beyond 18 degrees or burner flame is extinguished.

Technical Data

Operating pressure with gas  

:  

11’’WC (water column) (2.75 Kpa)

Inlet gas supply pressure 

 

:  

Min. 5 psi, Max. – 150 psi

Max. Heat rating  

 

 

:  

BTU 46,000

Low setting rating 

 

 

:  

BTU 17,000

Radiant Heat Range    

 

:  

14 ft. To 16 ft. Diameter

Fuel Type  

 

 

 

:  

Liquid Propane Gas

Cylinder Size    

 

 

:  

Standard Industry 20 lb. Cylinder (5 gal. Cylinder capacity)

Consumption Rate    

 

:  

Approx. 10 hrs. at highest setting

Gross Weight   

 

 

:  

63 lbs.

Certifications   

 

 

:  

CSA

Gas Pressure    

Main Orifice

Water Column  

Diameter in mm

11’’ (2.75 Kpa)   

1.8 

MADE IN CHINA

** WARNING **

Improper  operation,  installation,  adjustment,  al-

teration,  servicing  or  maintenance  can  cause  se-

vere  property  damage  and/or  serious  damage 

and/or  serious  injury  or  death.  Please  read  the 

installation,  operating  and  maintenance  instruc-

tions  thoroughly  before  installing,  operating  or 

servicing this appliance.

WARNING !

Summary of Contents for L10-SS-P
















Reviews: