Paramount Fitness FPT1524, Instruction Manual

Page: 10 / 21

10
ASSEMBLY INSTRUCTIONS
5. Connect hose and regulator to cylinder.
The propane gas and cylinder are sold separately. Use
a standard 20 Ib. propane cylinder only.
Use this heater only with a propane vapor withdrawal
supply system. See chapter 5 of the standard for
storage and handling of liquefied petroleum gas,
ANSI/NF PA58. Your local library or fire department
should ha
ook. ve this b
Storage o f an appli ance indoors is permissible only if
n il y c e h t
connected and removed fr the der is dis om
appliance . A cylinder must be stored outdoo rs in a
well -v ent ilated are a out of the reach of childre n. A
discon nected cylin der must have dust caps tightly installed
and must not be stored in a build ing, garage or any other
enclosed area. The maximum inlet gas supply pressu re:
250 psi, The minimum inlet gas supply pressu re: 5 psi.
The minim um hou rly of 10000 Btu is the require d input
rating fo r a heate r for automat ic operation at ratings less
than full input rati ng.
The pr essure reg ulator and hose assembly supplied with
the appliance must be used.
The insta
llation m ust conform with local codes, or in the
absenc e of local c odes,with national fuel g as c ode,
ANSI Z 223.1/N FPA45 , natural ga s and prop ane
Installat ion Cod e ,
CSA B149.1, or propane storage and
handling code, B14 9.2.
7
Standard 20 lb. tank
Use the L PG Cover-T t o c over t he L PG t ank p rior t o p lac ing t he L PG t ank u nder t he ass
embled f ire
pit
J
5