Paramount Fitness EF-WM410, Use And Care Manual, Page: 4 / 13

4
Installation- Wall Mount
1
Wall location preparation
□
Select the wall location where you want to hang your
fireplace.
□
Draw a horizontal line using a level (Figure F)
□
Using the mounting bracket as a guide, mark 4 drill holes
for the 4 anchors (for drywall) or 4 screws (for wood studs).
2
Pre-drill screw
□
Drill 4 holes 8 mm (5/16in) in diameter and 43 mm (1.7in)
deep on the marked locations.
□
For holes that do not hit a stud, use the supplied wall
anchor. Install the wall anchors into the holes and gently
tap them into place with a hammer until the flange of the
wall anchor is flush with the wall surface. See Figure G.
Figure G
Anchor/Screw locations
NOTE: The holes are for mounting the fireplace. Insure
the horizontal line is level so the heater can be mounted
properly.
Figure F
________
B X 4
(or as required)
NOTE: Please maintain at least 36 inches between the air
outlet on the fireplace and the ceiling.