Paramount 6.85E Owner’s Manual
13
Install Optional Power Supply
Perform a Visual Inspection
1.
The 6.85 E is a self powered machine,
however, an optional wall power supply
is available. When plugged into this
supply the display will be continuously
illuminated. If this option is to be
installed, place it onto the base cross
tube as shown and secure it in position
using the ties provided.
2.
Plug the supply into the plate on the
inside cover of the elliptical as shown
and then into the wall. Manage the
excess cord with wire ties and clips as
shown.
1.
Make sure that the power cord from the optional power
supply [if installed] is routed away from the elliptical
and can not be tripped on.
2.
Make sure that the elliptical is in a dry location.
3.
Make sure that the elliptical is level. All four corners
must be in contact with the floor.
4.
Make sure that there is enough clearance behind the
elliptical so that individuals passing by do not come in
contact with the moving foot pedals. There should be
at least 39’’ [1 meter] beyond the furthest travel of the
foot pedal or 50’’ [1.3 Meter] from the rear end caps.
