background image

The Multiple Medical Recliner is designed to be used in the treatment of dialysis patients and in
the drawing of blood samples from patients at medical institutions.

Please refer to the SPECIFICATION for the patient target groups, the intended users, and the clinical  
benefits.

2

1. Intended use

2. Frenquently used functions

INTENDED USE AND FEATURES

1

Adjusting the backrest angle

The backrest angle can be adjusted by the handheld   
controller, and the patient can be positioned in
comfortable position which is not difficult or 
detrimental to the human body.

*

The backrest can move from an angle of  0˚ to 75

˚.

p.16

Adjusting the legrest angle

The legrest angle can be adjusted by the handheld 
controller, and the patient can be positioned in a  
comfortable position which is not difficult or 
detrimental to the human body.

*   The leg rest can move from an angle of  -

30˚ to 0

˚.

p.16

Lowering the armrest

The armrest can be lowered, which enables the 
patient to easily be transferred from the wheelchair.   

p.14

[Other function]

Backrest and leg rest auto contour operation
The angle of the backrest and leg rest can be operated at the same time by the handheld controller, and 
the patient can thus adjust his/her position more quickly.

p.16

Emergency back-lowering function
The backrest can be lowered rapidly in case of fainting due to anemia or a similar condition and other  
emergency conditions, or a power failure.

p.18

Four-wheel stopper
A stopper is attached to each of the four wheels by which the recliner can be firmly fixed at its position.

p.17

Summary of Contents for PA-8200 Series









































Reviews: