27
6
USING THE RECLINER
Setting the operation sound
WARNING
z
z
Once the settings have been changed, press the Set button again to
confirm the setting. If you do not press the Set button, the changed
setting will not be set.
Operation speed settings
1
Switch to the setting mode by pressing the Set
button at the back of the handheld controller (see p.
25).
2
Press the backrest lowering button and switch the
recliner operation speed between “Normal/Fast”.
* Fast speed operates at 1.5 times Normal motion
speed.
Dark display: Normal
Bright display: Fast
* By factory default, all operation speeds are set to
Normal.
3
Confirm the setting by pressing the Set button at
the back of the handheld controller (see p. 25).
Setting the operation sound
1
Switch to the setting mode by pressing the Set
button at the back of the handheld controller. (See
p. 25).
2
Press the leg rest lowering button to set the
operation sound to “ON/OFF” when the operation
buttons on the handheld controller are pressed.
*
Dark display: OFF
Bright display: ON
* By factory default, the sound is turned ON.
3
Confirm the setting by pressing the Set button at
the back of the handheld controller (see p. 25).
Handheld controller replacement notification display
z
z
The wrench mark lights up on the display panel in
the setting mode indicating that it is time to replace
the handheld controller. Contact us (see “Contact
Information” on p. 46) for any queries.
* This illustration uses the 3-motor type handheld controller for
explanation.
Wrench mark
