paramondo Curve 2000, Installation Instructions Manual, Page: 54 / 84

54
www.paramondo.de
Screw anchor pull-out forces
Screw anchor pull-out forces
Pull-out forces state the force required for
pulling a screw out of the wall. No difference
is made between the screw plus screw an-
chor coming out of the wall, the screw brea-
king or the brickwork failing.
The pull-out forces state the maximum ten-
sile force that may be exerted on the screw
and/or screw anchor.
The fixing material must be selected to
match the fitting base, type of fitting and
pull-out forces.
The values in the table are stated in kN and
express the pull-out force of the anchor
(screw / screw anchor) which is subjected to
the highest tension.
The values are calculated for an anchor in
unbroken concrete.
The selection of the most suitable fixing ma -
terial depends on the type of fitting base and
its physical condition. The fitter is responsib -
le for checking the fitting base prior to fitting
the awning.
The screw anchor pull-out forces are calcu-
lated on the basis of Wind Resistance Class
1 in accordance with the EN 13561 and EN
1932 standards.
Size from
N/Console number
Wall Ceiling
345 cm x 300 cm 1212/2 1814/2
395 cm x 300 cm 1353/3 1989/3
445 cm x 350 cm 1949/3 2811/3
495 cm x 350 cm 2391/3 3435/3
595 cm x 350 cm 2810/4 4045/4