Web Site: www.parallax.com
Forums: forums.parallax.com
Sales: [email protected]
Technical: [email protected]
Office: (916) 624-8333
Fax: (916) 624-8003
Sales: (888) 512-1024
Tech Support: (888) 997-8267
Copyright © Parallax Inc.
WIZnet W5200 for QuickStart (#40002)
v1.0 3/13/2013 Page 1 of 10
WIZnet W5200 for QuickStart (#40002)
The WIZnet W5200 for QuickStart allows your
QuickStart board to serve data to an Ethernet network
or even the internet. The WIZnet W5200 chip provides
an Ethernet to SPI bridge which is interfaced with
Parallax’s 8-core microcontroller, the Propeller P8X32A.
The data served to a network can be anything you want
– web pages, serial data, email, and more.
Many useful demo programs are available for download
from the product page to get you started, including a
webserver capable of serving dynamic data from the SD
card to your favorite browser. Advanced users can
develop firmware that allows the WIZnet W5200 board
+ QuickStart to respond to or generate any type of
network traffic.
Features
Prewritten drivers to support common network protocols such as TCP and UDP connections,
HTTP, DHCP, DNS resolution, POP, SMTP, NetBIOS, and SNTP
Prewritten demonstration programs, including a simple web server
WIZnet W5200 TCP/IP 10BaseTX/100BaseTX Ethernet controller
Micro SD card support
I2C real time clock with super-cap battery backup
Supports IEEE 802.3af PoE (Power over Ethernet) with a Silvertel Ag9050 daughterboard module
(not included)
Power may be supplied by your computer’s USB port, onboard 2.1 mm barrel jack, or PoE
Open Source Hardware
Specifications
Power Requirements: 5–9 VDC, 300 mA max current draw, 175 mA typical current draw
Communication Interface: SPI through the standard QuickStart header
Operating temperature: -40 to +185 °F (-40 to +85 °C)
Dimensions: 3 x 5 in (7.6 x 12.7 cm)
Application Ideas
Webserver that serves dynamic sensor data
Web-enabled home automation
Remote weather monitor system
Upgrade your Propeller board’s firmware over the internet
