of 18
2
Introduction
Thank you for purchasing the Gazebo GZ634.
When properly assembled and maintained, this gazebo will provide many years of enjoyment! These instruc-
tions include helpful hints and important information needed to safely assemble and properly maintain the
gazebo. Please read these instructions completely before you begin.
Our patented gazebo has been designed for easy assembly. All steps can be completed by a team of three
people . The assembly should take about two hours.
Before Starting Assembly:
CAREFULLY READ ALL THE INSTRUCTIONS BEFORE YOU BEGIN AND FOLLOW THE STEPS IN THE
ORDER THEY ARE PRESENTED.
1.
Make sure you have all the necessary parts:
Compare the contents of the cartons to the List of Parts. If any parts are missing or damaged, or you
have any questions, please contact Customer service: (877)782 4482 before beginning assembly.
2.
Lay the parts out in separate staging areas:
The List of Parts has the corresponding step number referenced to each part. We recommend that
while you go through the list, make staging areas for each step and place the parts necessary for each
step in
these
areas.
This
will
save
you
time and effort during
assembly.
3. Select a Location:
Whenselecting a location for your gazebo, a flat level area is essential and if possible with proper
water
drainage and easy access to power and water, if neccessary. Choose a sunny, level position away from
overhanging trees and power lines and protected from the wind as much as possible. Locate under
ground pipes or cables before preparing the site or anchoring the gazebo.
Note: You may assemble the gazebo on a hard level surface and move it to its final location when
finished. Make sure that there are no obstacles between the assembly area and the final position.
4. Prepare a Foundation:
After choosing a location, proper preparation of the site is recommended. The site must be level.
If the site is not level, create a base slightly larger than the outside dimensions of the gazebo using a
perimeter of two by fours filled with either soil, sod or gravel. Make sure the base is square by
measuring the diagonals from both directions and making sure they are equal. The gazebo is secured
with pegs into holes cast with concrete. If you decide to have a concrete base, it is best to contact a
reliable contractor to make sure it is flat and level. Make sure you have checked with your local
authorities regarding any required building permits.
5. Make sure you have the proper tools:
• Tape Measure
•
2 Small Step Ladders
• Work Gloves
•
Wooden Mallet
• Safety goggles • Scissors
• Phillips Screwdriver • Liquid soap or WD40 Lubricant
• Spirit Level
• Hex Key (included)
NOTE: A cordless drill with Phillips head bit is highly recommended but not essential.