background image

HOW TO USE YOUR QUARTER MASTER 7700

Copyright 2010 DTX International

20

Quarter Master 7700 Electronic/
Digital Home Office Security Wall Safe

HOW TO USE YOUR QUARTER MASTER 7775

HOW TO USE YOUR QUARTER MASTER 7700

To setup or change a manager passcode:

1.   Open your safe with the passcode you wish to change and leave the door ajar.

2. Press the “0” button on the keypad twice. Press the red button, listen for a beep and then enter your 

new user passcode. New user passcodes may be 3 to 6 digits long. 

3. Immediately after entering your new code, press the “A” or “B” button on the keypad. Your user code 

is now changed.

Close the safe:

Turn the knob counter-clockwise, the mechanism will automatically lock the safe.

Open the safe:

1.   Input your code, then press the “B” button, the green light will turn on.

2. Turn the knob clockwise within 5 seconds, the door is opened. 
3. Each key being pressed is accompanied by a buzzer and a yellow flashing light .  

If the entered code is invalid the yellow light will flash and the buzzer  
will quickly beep and the user should enter the correct code again.

CAUTION

:  Entering an incorrect code 3 times will freeze the system for 20 seconds. 

Changing the Battery:

If both the red and green lights are on while safe opened, this indicates that the batteries must be 
changed. To be sure the batteries are correctly installed please test 

before

 you close the safe's door. 

Use 4 x AA Alkaline Batteries only.

IMPORTANT!

DO NOT OPERATE SAFE OR LEAVE SAFE OPEN AROUND CHILDREN. CHILDREN MAY 
BECOME TRAPPED AND RISK SUFFOCATION.

Follow these general gun safety rules:

1. Always keep guns unloaded until ready to use.

2. Make sure your guns are well-maintained and safe to operate. Clean and maintain your 

guns regularly.

3. Never use drugs or alcohol when handling, using or storing firearms.

4. Use only the correct ammunition for your gun.

5. Store guns away from unauthorized persons.

6. Know how to use your gun safely. Never point a gun at something you are not willing to 

destroy.

7. Know your target and what is beyond.

GENERAL SAFETY PRECAUTIONS

Summary of Contents for Brigadiere 7550





























Reviews: