Paragon Fires focus rs plus remote, Owner'S Manual

Page: 6 / 28

LT5944 Iss 1 (25/10/11)
6
PARAGON FOCUS RS PLUS Users Instructions
SECTION FOUR Cleaning & Fuel Bed Laying
Warning: - Before you clean any part of the appliance ensure that the appliance is switched off and
cool.
CLEANING: DECORATIVE TRIM

The Decorative finish of the trim is coated with a high temperature lacquer, it should be wiped with
a soft, clean, dry, cloth only.

The trim should be removed for cleaning. The fret should be removed before removing the trim,
which is held in place by four magnets.
CLEANING: BLACK PAINTED SURFACES

These surfaces should be dusted regularly and any marks removed with a soft cloth.

Abrasive or chemical cleaner should never be used.
CLEANING: GLASS PANEL
From time to time it may be necessary to clean the glass panel.
We recommend you use a Ceramic Hob Cleaner (brands such as
HOB BRITE and VITRO CLEN
have been found to be acceptable) these are available from most leading Supermarkets.
Remove the glass panel as follows:

Remove ash pan cover and fret.

Remove decorative trim (held in place with four magnets).

Slacken but do not remove the 4 nuts securing the bottom glass clamp.

Remove the 3 screws located down each side. Note : when they are replaced ensure the glass is
central and these brackets pushed up to the side of the glass before tightening the finger nuts.

While supporting the glass panel, remove the 4 nuts securing the top glass clamp, remove the top
clamp and slide the glass out gently.

Lay the glass panel down on a flat working surface on top of an old opened newspaper with the
side to be cleaned uppermost
take care not to erase the dot printing in the cleaning process .
Follow the Instructions on the Hob Cleaner Bottle.
On stubborn stains (where the appliance has been used for a long period without glass panel being
cleaned), use a new
Brillo Pad well wetted with the Hob cleaner applied directly to it.
Ensure all the residues of the cleaner are removed with a damp cloth and the glass panel is
completely dry before fitting to the appliance.