background image

6

 August 

2005

UIM1-A2-GZ40-00

EMI Notices

United States – EMI Notice

This equipment has been tested and found to comply with the limits for a Class A digital 
device, pursuant to Part 15 of the FCC rules. These limits are designed to provide 
reasonable protection against harmful interference when the equipment is operated in a 
commercial environment. This equipment generates, uses, and can radiate radio frequency 
energy and, if not installed and used in accordance with the instruction manual, may cause 
harmful interference to radio communications. Operation of this equipment in a residential 
area is likely to cause harmful interference in which case the user will be required to correct 
the interference at his own expense.

The authority to operate this equipment is conditioned by the requirements that no 
modifications will be made to the equipment unless the changes or modifications are 
expressly approved by Paradyne Corporation.

If the equipment includes a ferrite choke or chokes, they must be installed as described in 
the installation instructions.

Canada – EMI Notice

This Class A digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.

*UIM1-A2-GZ40-00*

*UIM1-A2-GZ40-00*

Copyright 2005 Paradyne Corporation. Printed in U.S.A.

Summary of Contents for UIM-10/100







Reviews: