background image

MIM2-A2-GZ40-00

October 2004

1

MIM-2E1

Installation Instructions

Document Number MIM2-A2-GZ40-00

October 2004 

Contents

Software and Firmware License Agreement

......................................................

1

Product Documentation Online

..........................................................................

3

Unpacking and Inspecting the Equipment

.........................................................

3

Installing the MIM-2E1

.......................................................................................

3

Connecting the E1 Line

.....................................................................................

4

E1 RJ45 Pinouts

................................................................................................

5

E1 Default Settings

............................................................................................

5

E1 Parameter Configuration

..............................................................................

6

LED Indicators

...................................................................................................

7

Regulatory Notices

............................................................................................

7

Warranty, Sales, Service, and Training Information

...........................................

8

Software and Firmware License Agreement

The terms and conditions of this License Agreement (the “Agreement”) will apply 
to the software and/or firmware (individually or collectively the “Software”) 
incorporated into the Paradyne product (the “Product”) purchased by you and any 
derivatives obtained from the Software, including any copy of either. If you have 
executed a separate written agreement covering the Software supplied to you 
under this purchase, such separate written agreement shall govern.

Paradyne Corporation (“Paradyne”) grants to you, and you (“Licensee”) agree to 
accept a personal, non-transferable, non-exclusive, right (without the right to 

ONCE YOU HAVE READ THIS LICENSE AGREEMENT AND AGREE TO ITS
TERMS, YOU MAY USE THE SOFTWARE AND/OR FIRMWARE INCORPORATED
INTO THE PARADYNE PRODUCT. BY USING THE PARADYNE PRODUCT YOU
SHOW YOUR ACCEPTANCE OF THE TERMS OF THIS LICENSE AGREEMENT.

IN THE EVENT THAT YOU DO NOT AGREE WITH ANY OF THE TERMS OF THIS
LICENSE AGREEMENT, PROMPTLY RETURN THE UNUSED PRODUCT IN ITS
ORIGINAL PACKAGING AND YOUR SALES RECEIPT OR INVOICE TO THE
LOCATION WHERE YOU OBTAINED THE PARADYNE PRODUCT OR THE
LOCATION FROM WHICH IT WAS SHIPPED TO YOU, AS APPLICABLE, AND YOU
WILL RECEIVE A REFUND OR CREDIT FOR THE PARADYNE PRODUCT
PURCHASED BY YOU.

Summary of Contents for MIM-2E1









Reviews: