manualshive.com logo in svg

Paradyne Jetstream CPX-1000, Reference Manual, Page: 22 / 141

Share
Download
Paradyne Jetstream CPX-1000 Reference Manual Download Page 22

2. Parameter Types

1000-A2-GH30-00

2-6

February 2003

Cable

This parameter is used for provisioning analog service. 

CableType

This parameter defines the type of cable used. 

ChannelGoTo

ChannelGoTo

 is used for provisioning analog service. This 

parameter indicates the signaling state(s) to where the channel unit 
should go under system failure conditions. It may be null if not 
used by a particular implementation. 

Note

This parameter is reserved for a future release.

Options

Description

L

Loaded cable

NL

Non-loaded cable

Options

Description

STRAIGHTCABLE

Straight cable

YCABLE

Y-cable

Note

This parameter is reserved for a future release.

Options

Description

OFFHK

Go on-hook for 2–3 seconds followed by 
off-hook for duration of the failure.

ONHK

Go on-hook for the duration of the failure.

Summary of Contents for Jetstream CPX-1000














































































































































Reviews:

No comments