February 2003
3-59
1000-A2-GH30-00
3. TL1 Commands and Messages
Figure 3–32. Report OC3 Alarm Format and Example
REPT ALM <OCFacility>: [TID]
“<oc_id>:<ntfcncde>,<condtype>,<srveff>,
<ocrdat>,<ocrtm>,[<conddescr>],[<exptdbhvr>]”
;
CPX-1000 2000-06-09 11:26:46
*C 342 REPT ALM OC3
“CPX-11-1:CR,LOS,SA,06-09-
2000,11:26:46,,,,,:
ATM-OC3 card 11 port 1 - SONET lost
signal,,,:,”
;
Example
Output Format
Table 3–31.Report OC3 Alarm Parameters and Description
Parameter
Parameter Type
Description
oc_id
This parameter indicates the optical carrier facility
id.
oc_id
is the AID OC.
ntfcncde
NotificationCode
This is the alarm level. It signals the severity of a
new condition and has a value of CL (Clear) when
this message signals the clearing of a condition.
condtype
ConditionType
This parameter lists conditions or alarms that
occur on a CPX-1000.
srveff
ServiceEffect
This parameter indicates the effect on service
caused by the standing or alarm condition.
ocrdat
Date
Date when the specific event or violation
occurred.
ocrtm
Time
This parameter indicates the date when the
specific event or violation occurred.