6
Connecting the Ethernet Line
Plug the Ethernet cable into the Ethernet Connection RJ45 port on the back of the
INE144. Verify the connection; solid illumination of the Ethernet Lnk LED indicates the
Ethernet connection has been established.
NOTE
For most applications, the INE144 connects to a PC using a straight-through
Ethernet cable and to a hub or a switch using a crossover Ethernet cable. For any
other connection combinations you must verify the pinout of the Ethernet device
into which you are connecting the INE144 in order to determine which type of cable
is required.
Table 3. Ethernet Port Pinouts
Contact
Usage
Pin 1
Rx+
Pin 5
not used
Pin 2
Rx-
Pin 6
Tx-
Pin 3
Tx+
Pin 7
not used
Pin 4
not used
Pin 8
not used
Summary of Contents for INE144-P
Page 11: ...11 ...
