14
If the Main Menu does not appear:
Press Enter again
Check the terminal or PC settings
Refer to
Troubleshooting
in the
iMarc SLV Operations Guide
Verifying that Self-Test Passed
To verify that the unit passed its self-test, go to the System and Test Status screen.
Main Menu
→
Status
→
System and Test Status
The results of the self-test appear directly under the screen title.
If any failure messages appear, reset the unit by disconnecting, then reconnecting the
power cord. The unit will perform the self-test again. If the failure reappears, call your
service representative for assistance.
main 9720-SLV
Device Name: Node A 09/13/2002 09:02
MAIN MENU
Status
Test
Configuration
Auto-Configuration
Control
Easy Install
-----------------------------------------------------------------------------
Ctrl-a to access these functions Exit
Summary of Contents for iMarc DSL 9720 CSU/DSU
Page 32: ...9720 A2 GN10 10...
