12
April
2003
8799-A2-GZ40-10
For complete details about the configuration options, see the
Hotwire 8799 TDM
SHDSL Line Card, with G.703 Interface, User’s Guide
.
Select . . .
To Access the . . .
To Configure the . . .
Management and
Communication
General SNMP Management
Options (
Table 9)
SNMP NMS Security Options
(
Table 10)
SNMP Traps Options
(
Table 11)
Inband Management Channel
Options (
Table 12
)
Management support of the
card through SNMP and the
Inband Management Channel.
Table 1. DSL Interface Options (1 of 2)
Port Status
Possible Settings:
Enable, Disable
Default Setting:
Enable
Specifies whether the DSL port is operational.
Estimated Line Length
STU-C Only.
Possible Settings:
short, medium, long
Default Setting:
short
Determines the estimated line length for the distance from the local exchange. Estimated
line length determines the speeds that can be supported.
Startup Margin
Possible Settings:
0dB – 15dB
Default Setting:
4dB
Specifies the Signal to Noise Ratio (SNR) margin a port must exceed to successfully train
up with the remote unit.
Max DSL Rate
STU-C Only.
Determines the maximum speed of the DSL line.
Min DSL Rate
STU-C Only.
Determines the minimum speed of the DSL line.
