Monitoring the Unit
6-5
7925-A2-GB20-30
PRELIMINARY DRAFT
June 1997
Remote Unit Information
The same type of information provided for the locally-attached unit (CP or CO)
can also be displayed (but not changed) for the unit on the other side of the
connection (CO or CP).
From a terminal attached to a CP unit, you can display information about the CO
unit by using the HTUC menu options. Similarly, from a terminal attached to a CO
unit, the HTUR menu allows you to display information about the CP unit.
To access the HTUC (or HTUR) menu:
If you have a G.703-compatible unit, enter 8 at the Command prompt.
If you have a V.35-compatible unit, enter 7 at the Command prompt.
***** HTUC Menu *****
1) Board Status
2) Performance Monitor
3) Board Configuration
4) Line Build Out Configuration Help
?)
Prints this menu
Q) Quit
HTUC Command
→
