4
Installing the Hotwire ADSL/R Bridge/Router
Place the router on a flat surface with clearance for the rear connectors.
Procedure
1.
UNPLUG TELEPHONE.
If a telephone is connected at
the RJ11 wall jack where the router will be installed,
unplug the telephone cable from the wall jack.
2.
RECONNECT TELEPHONE.
(Optional. Go to
Step 3
if you are not
connecting a telephone to the router.)
Plug the existing telephone cable that was
unplugged in
Step 1
into the jack labeled
PHONE. The router has a built-in filter, so
no filter is required on this phone.
3.
CONNECT DSL LINE.
Use the supplied
RJ11 telephone cable for the ADSL/R line
connection. Insert one end of the cable into
the jack labeled LINE. Insert the other end
of the cable into the RJ11 wall jack.
RJ11
Wall Jack
PHONE L
INE
ETHERNET
POWER
PHONE
RJ11
Wall
Jack
PHONE LINE
RJ11
6-pin
Interface
Cable
LINE
02-17358
