15
9580-A2-GZ40-10
June 1999
Configure the Unit
Configuration of the FrameSaver SLV 9580 DSU consists of the following steps:
-
Configure the system by selecting the:
— Service Level Verification options
— Network Interface options
— ATM Interface options
— Data Port options
— PVC Connection options
— VPI/VCI Entry options
— General options
— User Interface options
— Management and Communication options
-
Set the parameters for and run the Auto-Configuration.
Auto-configuration should not be run until you have used the
Configure branch to set up any specific management PVCs required
for your network.
Accessing and Displaying Configuration Options
To display the configuration options, you must first copy a configuration option set
into the edit area.
"
Procedure
To load a configuration option set into the configuration edit area:
1. Follow this menu selection sequence:
Main Menu
→
Configuration
Î
ÎÎ
main/config_load PARADYNE 9580
Device Name: Node A 05/13/2000 00:02
LOAD CONFIGURATION FROM:
Current Configuration
Default Factory Configuration
–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
Ctrl–a to access these functions, ESC for previous menu MainMenu Exit
