background image

 1

FrameSaver

 SLV 9124

Installation Instructions

Document Number 9124-A2-GN10-10

December 1999

Product Documentation on the World Wide Web

We provide complete product documentation online. This lets you search the
documentation for specific topics and print only what you need, reducing the waste of
surplus printing. It also helps us maintain competitive prices for our products.

Complete documentation for this product is available at www.paradyne.com.
Select 

Library 

Technical Manuals 

FrameSaver Frame Relay Devices.

Select the following document:

9124-A2-GB20
FrameSaver SLV 9124 User’s Guide

To request a paper copy of a Paradyne document:

Within the U.S.A., call 1-800-PARADYNE (1-800-727-2396)

Outside the U.S.A., call 1-727-530-8623

Package Checklist

Verify that your package contains the following:

FrameSaver SLV unit

Power cord with a desktop 120 Vac or 100–240 Vac power transformer, depending
upon the model ordered.

RJ48C modular cable for U.S. network access.

FrameSaver SLV 9124 Quick Reference (Document No. 9124-A2-GL10)

Be sure to register your warranty at www.paradyne.com/warranty.

Summary of Contents for FrameSaver SLV 9124




















Reviews: