background image

 24

Notices

!

WARNING:

THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS
FOR A CLASS A DIGITAL DEVICE, PURSUANT TO PART 15 OF THE FCC RULES.

THESE LIMITS ARE DESIGNED TO PROVIDE REASONABLE PROTECTION AGAINST
HARMFUL INTERFERENCE WHEN THE EQUIPMENT IS OPERATED IN A COMMERCIAL
ENVIRONMENT. THIS EQUIPMENT GENERATES, USES, AND CAN RADIATE RADIO

FREQUENCY ENERGY AND, IF NOT INSTALLED AND USED IN ACCORDANCE WITH
THE INSTRUCTION MANUAL, MAY CAUSE HARMFUL INTERFERENCE TO RADIO

COMMUNICATIONS. OPERATION OF THIS EQUIPMENT IN A RESIDENTIAL AREA IS
LIKELY TO CAUSE HARMFUL INTERFERENCE IN WHICH CASE THE USER WILL BE
REQUIRED TO CORRECT THE INTERFERENCE AT HIS OWN EXPENSE.THE

AUTHORITY TO OPERATE THIS EQUIPMENT IS CONDITIONED BY THE
REQUIREMENTS THAT NO MODIFICATIONS WILL BE MADE TO THE EQUIPMENT
UNLESS THE CHANGES OR MODIFICATIONS ARE EXPRESSLY APPROVED BY

PARADYNE.

!

WARNING:

TO USERS OF DIGITAL APPARATUS IN CANADA:THIS CLASS A DIGITAL APPARATUS
MEETS ALL REQUIREMENTS OF THE CANADIAN INTERFERENCEĆCAUSING

EQUIPMENT REGULATIONS.

CET APPAREIL NUMÉRIQUE DE LA CLASSE A RESPECTE TOUTES LES EXIGENCES

DU RÈGLEMENT SUR LE MATÉRIEL BROUILLEUR DU CANADA.

Government Requirements

Certain governments require that instructions pertaining to connection to the telephone
network be included in the installation and operation manual. Specific instructions are
listed in the following sections.

Note that 3810Plus and 3811Plus are the model names for the model numbers 3980
and 3981, respectively. The modems collectively are called 3800Plus modems.

United States – Notice to Users of the Telephone Network

1. This equipment complies with Part 68 of the FCC rules. On the equipment is a label

that contains, among other information, the FCC registration number and ringer
equivalence number (REN) for this equipment. The label is located on the bottom
of the Model 3810Plus modem and on the circuit card assembly of the Model
3811Plus. If requested, this information must be provided to the telephone
company.

2. For the standalone modems, the Universal Service Order Code (USOC) for

Permissive mode is RJ11C; the Canadian equivalent is CA11. For the
carrier-mounted modem, the USOC for Permissive mode is RJ21X (Canadian
CA21A).

Summary of Contents for COMSPHERE 3800PLUS





























Reviews: