BSX8-A2-GZ40-10
March 2005
13
LED Indicators
Table 2. LED States and Meanings
LED
State
Indication
Additional Information
PWR (Power)
Solid green
BSX8000-5 uplink module is
receiving power
Both BLC power terminals are connected.
Solid amber
BSX8000-5 uplink module is
receiving power
Only one of the BLC power terminals is
connected.
No illumination
No power
The BSX8000-5 uplink module is not receiving
power (the BLC may or may not be receiving
power).
OK
Pulsing green*
BSX8000-5 uplink module is
operational
Fan
Solid green
All fans are functioning
All four of the fans on the BLC fan card are
functioning.
Solid amber
Non-functioning fan
At least one of the four fans on the BLC fan card
is no longer functioning.
Lnk (Link)
Uplink Ports
and MGMT
Solid green
GigE link established
The MGMT port does not support GigE.
Solid amber
Link established at 10 or
100 Mbps
No illumination
No link is established
Act (Activity)
Uplink Ports
and MGMT
Flashing green*
Traffic flowing on link
Dup (Duplex)
Uplink Ports
and MGMT
Solid green
Full duplex mode
No illumination
Half duplex mode
[MIM] Lnk
(Link)
Solid green
MIM-10/100, MIM100F,
MIM-2000F, MIM-4000F,
uplink connection is
established
For further information regarding MIM LEDs,
please refer to the corresponding MIM Installation
Instructions.
Flashing green*
*
A pulsing LED blinks steadily at a rate of once per second. A flashing LED blinks at a more rapid,
less constant rate.
MIM-2T1 or MIM-2E1 uplink
connection is established
For further information regarding MIM LEDs,
refer to the corresponding MIM Installation
Instructions.
No illumination
No uplink connection is
established
Applicable to all MIM model types.
