Paradyne BitStorm 1900, Installation And Maintenance Manual

Page: 103 / 160

2. BitStorm 1900 Installation and Testing
1900-A2-GN20-00 BitStorm 1900 Installation and Maintenance Guide 2-87
Task 013: Configuring Remote Management
The MIU can be remotely managed via the management 10Base T-X
Ethernet port as shown in Figure 2-20, "Telnet Connection for the
BitStorm 1900."
Figure 2-20: Telnet Connection for the BitStorm 1900
To access and configure the MIU SNMP function, clients will either
use an SNMP Network Management Software solution (i.e., EMS 2.x,
HP OpenView, CastleRock’s SNMPc, etc.) or Telenet into the MIU and
use the CLI (Command Line Interface).
BitStorm™ 1900
Decapus Cable
RJ-45
RJ-11
to
RS-232
RJ-45
10Base T-X
Ethernet Port
02-17191
POWER
READY
100Mb/s
LINK/ACT
LINK/ACT
100Mb/s
100Mb/s
LINK/ACT
LINK/ACT
100Mb/s
100Mb/s
LINK/ACT
LINK/ACT
100Mb/s
1 2 3 4
5 6 7 8
17 18 19 20
21 22 34 24
Router
Ethernet Switch
TELNET Connection CRAFT Connection