Paradyne ACCULINK 317 Series, Operator'S Manual

Page: 50 / 167

ACCULINK 317x E1 DSU/CSU
3-28 December 1996 3170-A2-GB20-20
8. If you selected NET the channels allocated to the
Network E1 interface are displayed. Line 1
displays the 31 channels for the Network E1
interface, while Line 2 displays what is allocated
to the DS0 channel shown in Line 1. Pressing the
or key scrolls the channels onto the screen
in groups of three.
F1
N1 N2 N3
D2 D3 Prt1
F2 F3
If you selected DTE, the channels allocated to the
DTE Drop/Insert interface are displayed. Line 1
displays the 31 channels for the DTE Drop/Insert
interface, while Line 2 displays what is allocated
to the DS0 channel shown in Line 1.
F1
D1 D2 D3
– N1 N2
F2
F3
Allocating Data Ports
Assign a specific port (Prt1 and Prt2 for Model 3172,
Prt1 through Prt4 for Model 3174) to DS0 channels on
either the Network interface or the DTE Drop/Insert
interface by using the configuration options. The
following methods are available to assign DS0 channels to
the port:
Block – Allows a block of contiguous channels to be
assigned by specifying a data port rate and an initial DS0
channel (the first DS0 channel in a block of DS0
channels). The number of channels assigned is determined
by the port rate. Only those initial DS0 channel numbers
that provide enough bandwidth (based on the port’s data
rate) are displayed on the screen. These channels are
automatically assigned to the destination E1 interface
when the initial DS0 channel is selected.
Chan – Individually selects the DS0 channels to
allocate to the data port. The data port rate is
automatically determined based on the number of
channels selected.
Once a port is selected, you have access to
configuration options to complete the port allocation
procedure. These configuration options enable you to,
•
Assign the selected port to the desired interface
•
Select the desired method for channel allocation
•
Select the port rate and starting channel (if the
allocation method is block)
•
Select the specific channels if the allocation method
is by individual channel
These configuration options are explained in detail in
Appendix C.
To select the data port,
1. Press F3 to select Cnfig from the top-level menu
screen.
2. Select the configuration option set to be copied
into the Edit area by using the appropriate
Function key. Use the scroll keys, if necessary.
3. Press F1 to select Edit.
4. Press the key from the Edit screen to display
the Chan selection.
5. Select Chan.
F1
Edit:DTE
Port
NET Chan
F2 F3
6. From the Channel Config screen, press the
key to scroll the ports onto the screen.
F1
Channel Config:
Dsply
Clear DTE
F2 F3