7
7112-A2-GN10-40
February 2000
Setting Up the ATI
The User’s Guide contains details regarding the ASCII Terminal Interface (ATI).
When setting up the ATI:
-
Refer to Chapter 1, About the T1 DSU/CSU, to determine the management
configuration(s) to manage the DSU with one of the user interfaces.
-
Set up the device name. Refer to Chapter 3, Configuring the DSU/CSU.
-
Establish security and Login IDs. Refer to Chapter 4, Security.
-
Decide on an IP addressing scheme. Refer to Chapter 5, IP Addressing.
-
Determine if you want SNMP traps generated. Refer to Chapter 8, Messages
and Troubleshooting.
-
Change configuration option settings. Refer to Appendix A, Configuration
Option Tables, and Appendix B, Worksheets.
-
Provide management connectivity with MIBII and enterprise-specific MIBs.
Refer to Appendix C, MIB Descriptions, and Appendix D, Standards
Compliance for SNMP Traps.
Configuration Options and Defaults
Tables 2 through 8 list the DSU/CSU’s configuration options and the default
values that have been preconfigured at the factory.
Table 2.
System Options
Configuration Option
Settings (default in Bold)
Self Test
Enable, Disable
Test Timeout
Enable, Disable
Test Duration (min)
1–120 [10]
