Paradyne 496-15149 Installation Instructions Download Page 2

Page: 2 / 4

Technical Specifications

Specification

Criteria

Rated Voltage (nominal)

100–250 Vac, 50/60 Hz

Rated Current

1.0 Amps

Operating Voltage Range (limits)

90–265 Vac 47–63 Hz

Power Consumption (typical)

120 Vac 29.7 watts 452 mA

230 Vac 29.9 watts 270 mA

Result: 102 Btu per hour

Installing a Replacement Power Supply

Install a replacement power supply using the following instructions.

WARNING:

Before you remove the power supply module, you

must

unplug the power

cord from the power receptacle and from the rear of the housing before
attempting to remove the module.

1. Unplug the power cord from the power receptacle and from the rear of the housing.

2. Remove the front bezel by depressing the latch at the top of the housing and lifting

the bezel out of the two slots in the bottom of the housing.

496-15123

Summary of Contents for 496-15149

Page 1: ...rvice personnel HANDLING PRECAUTIONS FOR STATIC SENSITIVE DEVICES This product is designed to protect sensitive components from damage due to electrostatic discharge ESD during normal operation When p...

Page 2: ...er Supply Install a replacement power supply using the following instructions WARNING Before you remove the power supply module you must unplug the power cord from the power receptacle and from the re...

Page 3: ...des provided on the housing 7 Tighten the two screws on the power supply using the screwdriver 8 Reattach the front bezel to the housing 9 Reattach the power cord Power Up Verification WARNING The pow...

Page 4: ...power by plugging in some equipment that is known to be working Check the circuit breaker Power supply is not fully inserted into the housing Reinstall the power supply making sure that you gently pus...