1754 SHDSL Router
Quick Installation Instructions
Document Number 1754-A2-GZ10-00
June 2005
Installation
➊
Connect one of the supplied RJ11 cables to the port marked DSL
1-2 at the back of the SHDSL router. Connect the other end of the
cable to a SHDSL source. Connect the other supplied RJ11 cable
to the port marked DSL 3-4. Connect the other end of the cable to
a SHDSL source.
➋
Insert one end of the RJ45 Ethernet cable into one of the LAN
ports marked LAN on the back of the SHDSL router. Connect the
other end of the cable into the Ethernet Network Interface Card
(NIC) in your PC. Connect up to four Ethernet devices to the
router. Use a crossover cable for a hub.
➌
Connect an earth ground to the grounding terminal (marked FG).
➍
Connect the supplied external AC adapter into the DC power
outlet on the back of the router. Connect the power supply into
your wall outlet or surge protector.
The router’s default IP address is 192.168.1.1. To configure the
router, set up your PC to be on the same network segment and open
192.168.1.1 with your web browser. The default user name is
admin
and the default password is
admin
.
See the user’s guide on the CD for more information.
*1754-A2-GZ10-00*
*1754-A2-GZ10-00*
05-17664
FG
DSL
LAN
CID
DC IN
Reset
Internet
RJ11
Switch
or
Hub
RJ45
Copyright 2005 Paradyne Corporation. Printed in U.S.A.
