3.
Make sure the SD card is installed properly and locked with text facing back-
ward to wall/connections facing to the front, as shown in Figure 2.
4.
Secure the wire plug to the PCB socket the wires as per the color code to
match the Paradox keypad bus code. The blue wire is keypad zone input.
5.
Attach the SD card cover if needed, then attach top to back top hooks first
then lock the bottom as per Figure 1. The SD card can be removed if neces-
sary with a flat screw from the top if the metal cover is not attached or by
opening the keypad for loading pictures.
6.
Power up the bus and verify that the voltage is higher than 11.5V (displayed
at the bottom right of the main screen as well as the boot sequence screen).
Technical Specifications
TM70
TM50
Power Input
9 to 15 VDC
Consumption
250mA at max brightness
+ 80mA sounder
150mA at max brightness
+ 80mA sounder
Wire Connection
18 Gauge
18 Gauge recommended,
22 Gauge
Display
7” 800 x 480
5” 480 x 272
Dimensions
17.7 x 11.4 x 1.5 cm
(7 x 4.5 x 0.6 in.)
14.2 x 9.5 x 1.4 cm
(5.6 x 3.75 x 0.56 in.)
Humidity
5-90%
Indoor Temp.
Yes
SD Card
4GB; 2GB free
Input
Zone
Tamper
Built-in, Cover and Wall
Compatibility
Swan, EVO, Spectra
Remote Upgrade
Swan only
Jpeg Download
Swan via Bus, EVO/Spectra SD Card
Auto Dim
Yes
Chime
Yes
Warranty
: For complete warranty information on this product, please refer to
www.paradox.com/terms. Specifications may change without prior notice.
