o
Enter the dealership service email address
o
Enter the customers email address. Use a comma between addresses (example:
[email protected] <mailto:[email protected]>, [email protected]
)
Once all setup information has been setup, go to connections and bind the RS232 connection. This will
automatically begin processing the setup information with the alarm panel.
Downloading Zone, Area and User Label information:
Cinegration has added in the support to download Area, Zone and User label data from the
Paradox system. To download, go to actions, and press the corresponding download label that you
want. Note: This may take extra time depending on the number of zones or users the panel has.
Once the download is complete, the dealer will need to double-click on each zone and adjust the zone
type properties for each
Connecting Zones Proxies to the Driver
The dealer should add sensors for each zone and bind them to the correct input on the panel.
This step allows programming on the zone level in Control4 programming. (see image below for an
example of properly setup zone binding list)
